CLOSED POSITION INDICATOR FOR VMR / EVRM GAS VALVES

The PCS Closed Position Indicator switch is a mechanically activated micro-switch for monitoring the position of the gas valve. The safety device can be fitted to the vmr & evrm gas valve.

Each switch is supplied with an adapting rod already fitted to make installation easier.

CAUTION: The solenoid valves must be provided with a G1⁄8" threaded hole on the bottom, to allow the switch assembly (Micro Daptine Rod must be required).

MICROSWITCH INSTALLATION.

1. Interrupt gas supply.
2. Remove the 1⁄8" plug from valve bottom.
3. Introduce the adapting rod inside 1⁄8" hole and screw the micro switch with o-ring.

ELECTRICAL CONNECTIONS (IEC 730-1)

1. Turn off power supply
2. Unscrew the Din plug and connect cables to terminals 1, 2, 3
3. Screw back the Din plug using the gasket properly.