029 2046 3345

We very proud to introduce the new E - Sense - FAI Co2 detection transmitte

Posted on: Thursday, September 24, 2015

We are very proud to introduce the eSENSE - FAI to extend our range of Co2 detection. The eSENSE - FAI is a new simple, low - cost, state - of - the - art infrared and maintenance - free carbon dioxide alarm for installation in areas where the carbon dioxide levels need to be monitored, such as classrooms and offices.
eSENSE - FAI measures the carbon dioxide concentration in the ambient air and alarms with sound and light when the levels are exceeding the defined levels.

Technical Specifications

Power input: 24V AC / DC +/- 20%, 50Hz
Power consumption: <1W average
Sensor:Gold-plated non-dispersive infrared
Measurement range: 0 - 3000ppm
Accuracy: +/- 30ppm +/- 3% of reading
Response time:< 10 seconds
Output: 0 - 10V DC for 0 - 2000ppm
Audible alarm: 50 decibels
Operating temperature: 0oC to 50oC
Storage temperature: -40oC to 70oC
Warm-up time: <1 minute

SenseAir's patented state - of - the - art, gold - plated, non - dispersive infrared (NDIR) wave guide technology offer reliable measurements. The eSENSE - FAI has a unique 'traffic light' indication system for Co2 levels. Displaying green under normal condition, the colour will raise to yellow and then red upon higher concentrations of Co2. An audible alarm is also fitted to this unit, which can be muted for thirty minutes using the switch on the side. eSENSE - FAI is an extremely cost - optimised sensor solution for climate monitoring in, for example, classrooms & offices. A Co2 concentration below 1000ppm should always be the aim.

Heat & Combustion Supplies

Unit E5, Southpoint Industrial Estate
Foreshore Road, Cardiff Bay, Cardiff CF10 4SP

Tel: +44 (0) 29 20 463345
Fax: +44 (0) 29 20 463346


Please refer to manufacturers documentation for
full safety specification and correct fitting.