029 2046 3345

ELEKTROGAS EVRM - NC MANUAL RESET GAS VALVES NOW IN 10 & 12

Posted on: Tuesday, July 01, 2014

We are constantly searching and trecking across the globe to increase our product portfolio and make sure Heat & Combustion Supplies Ltd is your primary H.V.A.C. solution specialists. With this in mind we have now expanded our range of manual reset gas valves to now include a 10” and 12” unit. So
the EVRM range of gas valves now covers from 1/2” through to 12”

ELEKTROGAS EVRM - NC MANUAL RESET

The EVRM-NC type valve is a manual reset safety valve that is normally closed (open when energised). This type of device, connected to one or more gas leakage detectors, safety thermostat or alarm signals for the presence of carbon monoxide, is suitable to perform locking operations on the gas line.

Features

  • The valves are made of aluminium alloy die-cast (or hot-pressed brass for OT versions), with a wide range
    for connections from DN10 up to DN300
  • Suitable for use with air and non-aggressive gases included in the 1, 2 and 3 families (EN 437)
  • This valve is open only when energised: if, for any reason, power supply goes down, the valve closes
    immediately (intrinsically safe)
  • An incorporated fine mesh filter protects the valve seat and disc as well as downstream components and
    prevents dirty contamination (except brass models)
  • Provided with G1/4 pressure tappings on two sides in the inlet chamber (except brass models)
  • Flanged models are provided with tappings in the outlet chamber too. Other tapping points on request
  • Provided with G1/8 connection on the bottom for closed position indicator micro switch from DN65 to
    DN200 (on request from 3⁄4" to 2")
  • Pipe connections meet group 2, according to EN161 requirements.
ELEKTROGAS EVRM - NC MANUAL RESET
H&C Price Portal

Heat & Combustion Supplies

Unit E5, Southpoint Industrial Estate
Foreshore Road, Cardiff Bay, Cardiff CF10 4SP

Tel: +44 (0) 29 20 463345
Fax: +44 (0) 29 20 463346

sales@heatcombustion.co.uk
www.heatcombustion.co.uk

Disclaimer:
Please refer to manufacturers documentation for
full safety specification and correct fitting.