029 2046 3345


Posted on: Friday, December 12, 2014

We are very proud to introduce the HC - REF - VI commissioning tool. The unit provides a 0 - 10Vdc and 4 - 20mA output in a switch selectable range. The unit is powered by a 24Vac plug top power supply unit, which is included with the module. A 24Vac fused output is also provided with the unit. The module ships with cables fitted with banana plugs on one end and a flying lead on the other. The HC - REF - VI can be used to test valve actuators on a test bench or prior to installation.


0 - 10Vdc output in 1.0v steps
0.0 - 20.0mA output in 2.0mA steps
24v fused output provided
230v plug top supply included.


Supply voltage 230Vac 50Hz (+/-15%)
Output 0-10V 0 - 10.0V in 1.0V steps at 10mA max
Accuracy at 10.0V ±1%
Accuracy 1.0V-9.0V ±2%
Output 0-20mA 0.0 - 20mA in 2.0mA steps into 1kΩ
max load
Accuracy at 20mA ±1%
Accuracy 2.0 -18.0mA ±2%

Output 24Vac fused internally at 500mA
Terminals 4mm binding posts
Ambient temperature range 0°C - 40°C
Dimensions 130(W) x 75(H) x 32(D)mm maximum
(not including power supply unit)
Housing Moulded ABS
Weight Unit 140gms (+ Power supply unit 500gms)
Country of origin United Kingdom


We are very please to be able to bring you
this very impressive module for just

£50.00 ea net

Heat & Combustion Supplies

Unit E5, Southpoint Industrial Estate
Foreshore Road, Cardiff Bay, Cardiff CF10 4SP

Tel: +44 (0) 29 20 463345
Fax: +44 (0) 29 20 463346


Please refer to manufacturers documentation for
full safety specification and correct fitting.